How do I install and set up my eSIM?

Articles in this section

1. Go to settings > mobile data > Click on ‘Add eSIM’

2. Click on ‘Add eSIM’ and select use QR code

3. Scan the QR code and enter the 4-digit confirmation code if it is requested

4. Label your eSIM and select ‘cellular data only’ under the default line page

5. You should now see your eSIM under “Mobile Data”

1. Go to settings > mobile data

2. Click on ‘Add eSIM’ and select use QR code

3. Instead of scanning the QR code, click on enter details manually

4. Enter the SM-DP+ Address, activation code and the optional confirmation code available on your eSIM app

5. Label your eSIM and select ‘cellular data only’ under the default line page

6. You should now see your eSIM under mobile data

1. Go to Phone Settings > Network & Internet > SIMs

2. Tap the “+” icon to the right of the “SIMs” option

3. Tap the “Download a SIM instead?” option at the bottom

4. The subsequent page will read “Download your SIM”, click on “Next” and you will see “Checking network info…” on the next screen

5. After the checking process is done, you will see a box which you can use to scan your QR code

6. Point the box at a printed copy of the QR code or use another device to display the QR code. Make sure that the QR code is located within the box.

7. Once the QR code scanning is done, your device will check for info again

8. Tap download to confirm the eSIM that you’re adding and then the device will start downloading the eSIM data

9. Once the eSIM has been successfully downloaded and installed, you will see “Download Finished” on your screen

10. Don’t forget to set up the eSIM to access the internet once you’re ready.